Removing and Installing/Replacing Servodrive For Tank Filler Flap

67 11 555 - Removing and installing / replacing servodrive for tank filler flap





Necessary preliminary tasks:
- Remove top trim from tail panel 51 46 050 Removing and Installing/Replacing Top Trim on Rear Apron
- Partially remove luggage compartment wheel arch trim on right





Feed out emergency actuation pull strap (1) in direction of arrow.
Fold acoustic insulation (2) forwards.





Disconnect plug connection (1).
Slacken screws (2)
Feed servodrive for fuel filler flap (3) in direction of arrow out of retaining plate (4) and remove.

Installation:
Carry out adjustment of servodrive for tank filler flap (3) via both elongated holes. It must be possible to lock or unlock the fuel filler flap completely.





Turn sleeve (1) with a suitable tool (e.g.: pointed pliers) approx. 45° in direction of arrow and pull out of cover housing (2).






Installation:
Slide sleeve (1) over locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).





Replacement:
Release screws (1).
Disengage emergency actuation pull strap (2) from retainer (5) and remove towards front.
If necessary, unclip locking pin (3) in direction of arrow from servodrive for tank filler flap (4).