Removing and Installing/Replacing Ski Bag With Casing on Rear Seat (Through-Loading System)

52 26 ... - Removing and installing/replacing ski bag with casing on rear seat (through-loading system)





Necessary preliminary tasks:
- Remove centre armrest Removing and Installing Complete Centre Armrest for Rear Seat Backrest (Through-Loading) or
- filler element





Press ski bag (1) on rear side out of backrest.





Lift off cover (1).
Release screws (2).

Installation:
Make sure cover is correctly installed.





Unclip single opening trim (1) towards top.

Installation:
Plastic clips must not be damaged.
If necessary, replace faulty trim.





Remove C-module trim (1) in direction of arrow.