33 32 180 Removing and Installing/Replacing Left or Right Toe Arm
33 32 180 Removing and installing/replacing left or right toe arm
Note:
If the toe arm is detached from the rear axle support/wheel carrier, it is necessary after reinstallation to carry out a wheel/chassis alignment check.
Necessary preliminary tasks:
^ Remove rear wheel
If necessary, open cover (1) on stone guard (2).
Mark position of eccentric bolt to rear axle support.
Release bolt.
Tightening torque 33 32 8AZ.
Installation:
If necessary, turn toe arm by hand.
Release nut (1) and remove eccentric washer (2).
Tightening torque 33 32 7AZ.
Unscrew eccentric bolt towards front and remove toe arm (3).
Installation:
Bolt head points in direction of travel.
Reinstall eccentric washer.
Replace self-locking nut.
Align eccentric bolt to rear axle support by means of marking.
After installation:
^ Perform wheel/chassis alignment check
๋ :
